Screw Kit for Stealthburner Upgrade (Stainless V2A)

€4.99*

Product number: RT10081
Product information "Screw Kit for Stealthburner Upgrade (Stainless V2A)"

This screw kit contains all screws, nuts and heat stakes needed to build a Stealthburner according to the manual. You continue to use your existing Clockwork or Galileo extruder. Also included are the inserts and screws for the recently added ADXL mount.

 
Important: We include at least one spare screw or nut. You will have leftovers! 
Note that the M3x6 FHCS screws are not V2A but nickel plated steel, but that part isn't visible anyways.
 
Contents:
M3x50 SHCS
 
3
 
M3x25 SHCS 5
M3x16 SHCS 3
M3x12 SHCS 5
M3x6 FHCS 3
M3 Brass heat stakes - M3x5x4   6
Self-tapping Screw 2x10 3
Grub Screw M3x3, 5 pcs
5 pcs grub screw M3x3, suitable as replacement for the BMG motor gear. Material: Steel 12.9, browned

€0.99*
Bed Spring 25mm (yellow, light load)
Spring for the heated bed, yellow, light load. Length 25mm, inner diameter 4mm, outer diameter 8mm. Attention The Sourcing Guide specifies 20mm springs, but is linking to 25mm springs. Please ask in the Voron Discord if in doubt. I'm using 25mm springs on my Voron v1.8.

€0.50*
Rainbow Barf Logo LED for StealthBurner
The popular Rainbow Barf Logo LED for StealthBurner and possibly many other fun projects! Designed by whoppingpochard and VinnyCordeiro. For instructions and the required STLs visit the Rainbow Barf Github page. Comes with a 100 Ohm resistor for the data line to prevent signal reflections (see our Neopixel info page). The diffusor can be ordered separately.

€6.49*
Rainbow Barf LED Diffusor printed part
The Rainbow Barf Diffusor for use with the Stealthburner, printed in transparent PETG (which is the only exception when you should use PETG in your Voron ever!). We include 2 pieces because print defects are pretty hard to spot.Note that this part was printed on request (latest version as of 5th September 2022), and we made a few more. We did not test the part, so buy it on your own risk as we don't follow any updates to the printed part.

€0.50*
Bed Spring 20mm (yellow, light load)
Spring for the heated bed, yellow, light load. Length 20mm, inner diameter 4mm, outer diameter 8mm. Attention The Sourcing Guide specifies 20mm springs, but is linking to 25mm springs. Please ask in the Voron Discord if in doubt. I'm using 25mm springs on my Voron v1.8.

€0.50*
Screw Kit for Stealthburner+Clockwork2 (Stainless V2A)
This kit includes all screws, nuts and heat stakes to build a Stealthburner + the Clockwork 2 extruder based on the current StealthBurner manual release.  Also included are the inserts and screws for the recently added ADXL mount. Important: Because Stealthburner has no BOM yet, we include at least one spare screw or nut. You will have leftovers!  Note that the M3x6 FHCS screws are not V2A but nickel plated steel, but that part isn't visible anyways. Contents:M3x50 SHCS3M3x40 SHCS2M3x30 SHCS3M3x25 SHCS7M3x20 SHCS2M3x16 SHCS6M3x12 SHCS7M3x8 SHCS9M3x6 BHCS2M3x6 FHCS4M3 Hexnut3M3 Washer2M3 Brass heat stakes - M3x5x4 282x10mm self-tapping screw3

€12.49*
M3x50, Steel Black, 2 pcs
2 pieces M3x50 screw in Steel Black

€0.69*
DIN Rail 200mm
DIN rail 200mm length, 35x7.5. Material: Sendzimir galvanized steel. Hole pattern 18x5.2mm.

€4.99*
5pcs M2.5x8 Screws
For attaching the Dragon hotend to the Afterburner mount. Comes with one screw extra in case gravity kicks in.

€0.59*