Neodym Disc Magnets, 6x3mm, N45, 10 pcs

€5.29*

Available, delivery time: 2-7 Werktage

Product number: RT10046
Product information "Neodym Disc Magnets, 6x3mm, N45, 10 pcs"
10 Neodym disc magnets, grade N45 with Nickel-Copper-Cickel Plating. Very well suited for the klicky probe due to the high conductivity of the surface.

Magnets are delivered with a holder to prevent damage to the magnets and avoid sticking to things they shouldn't stick to. 
Material
Neodym (NdFeB)
GradeN45
CoatingNickel-Copper-Nickel (Ni-Cu-Ni)
Diameter6 mm
Height3 mm
Dimensional Accuracy± 0,1 mm
Weightca. 0.64 g
Screw Kit for Stealthburner+Clockwork2 (Stainless V2A)
This kit includes all screws, nuts and heat stakes to build a Stealthburner + the Clockwork 2 extruder based on the current StealthBurner manual release.  Also included are the inserts and screws for the recently added ADXL mount. Important: Because Stealthburner has no BOM yet, we include at least one spare screw or nut. You will have leftovers!  Note that the M3x6 FHCS screws are not V2A but nickel plated steel, but that part isn't visible anyways. Contents:M3x50 SHCS3M3x40 SHCS2M3x30 SHCS3M3x25 SHCS7M3x20 SHCS2M3x16 SHCS6M3x12 SHCS7M3x8 SHCS9M3x6 BHCS2M3x6 FHCS4M3 Hexnut3M3 Washer2M3 Brass heat stakes - M3x5x4 282x10mm self-tapping screw3

€12.49*
M3x50, Steel Black, 2 pcs
2 pieces M3x50 screw in Steel Black

€0.69*
Omron
Omron D2F
Omron D2F Microswitch without lever. Suitable for Z-Endstop and the Klicky Probe. Specifications similar to D2F-5. Picture only shows the D2F-5 variant.

€2.39*
Replimat Labs
Nevermore V5 Fan Wiring PCB
A small PCB which makes wiring the dual fans easier. No more fiddling with heatshrink and connecting 2 wires to a JST Header required.

€1.49*
3x6x0.5mm Shim Ring DIN 988, 40 pcs
Shim Ring with 3mm inner diameter, 6mm outer diameter and a thickness of 0.5mm. 40 pieces.Height tolerances according to DIN 988: -0.05mm.

€3.50*
Screw Kit for Stealthburner Upgrade (Stainless V2A)
This screw kit contains all screws, nuts and heat stakes needed to build a Stealthburner according to the manual. You continue to use your existing Clockwork or Galileo extruder. Also included are the inserts and screws for the recently added ADXL mount.   Important: We include at least one spare screw or nut. You will have leftovers!  Note that the M3x6 FHCS screws are not V2A but nickel plated steel, but that part isn't visible anyways.   Contents: M3x50 SHCS   3   M3x25 SHCS 5 M3x16 SHCS 3 M3x12 SHCS 5 M3x6 FHCS 3 M3 Brass heat stakes - M3x5x4   6 Self-tapping Screw 2x10 3

€4.99*
Replimat Labs
Nevermore Micro V5 Duo Printed Parts V0
Printed parts for the Nevermore Micro V5 Duo V0 Printed using AmazonBasics ABS Black or Sunlu ABS Black, depending on availability. Part List: Duo_Cartridge_STRAIGHT-AIRFLOW_by_aive.stl Duo_Cartridge_LID.stl V0_Duo_Plenum.stl Plenum_LID.stl

€13.99*
5pcs M2.5x8 Screws
For attaching the Dragon hotend to the Afterburner mount. Comes with one screw extra in case gravity kicks in.

€0.59*
Bed Spring 25mm (blue, medium load)
Spring for the heated bed, blue, medium load.Length 25mm, inner diameter 4mm, outer diameter 8mm. Attention The Sourcing Guide specifies 20mm springs, but is linking to 25mm springs. Please ask in the Voron Discord if in doubt. I'm using 25mm springs on my Voron v1.8.

€0.49*