Multi-material units
Alternative to the TRCT5000 encoder setup. GitHub Project
Hardware Kit for the Goose Belt PurgerDemonstration VideoComes with the MicroFlip PCB, so that you don't need to worry about frying your MCU fan port.MicroFlip ManualThis hardware kit contains enough hardware to build either mount variant. Quantity Part 1 pcs Silicone Wrist Band 1 pcs 6V 30RPM motor 3 pcs 623-2RS 2 pcs 6x3 Magnet N45 14 pcs Heatset Insert M3x5x4 2 pcs M3 Nut 3 pcs M3 Lock Nut 2 pcs M3x06 Grub Screw 1 pcs M3x20 SHCS, V2A 1 pcs M3x16 SHCS, V2A 2 pcs M3x20 FHCS, V2A 1 pcs M3x30 SHCS, V2A 8 pcs M3x08 SHCS, V2A 1 pcs M3x35 SHCS, V2A 1 pcs M3x25 SHCS, V2A 1 pcs MicroFlip Board 1 pcs JST PH Housing 2p 5 pcs JST PH Crimp Contact
ECAS04 PTFE Connector. Must be assembled by pushing the blue part into the grey part - parallel pliers are the easiest way to do it. Avoid using your fingers ;)
PC4-M6 PTFE Coupler for the ERCF toolhead sensor body. The PTFE tube is pushed through the coupler and is held in place by the plastic part.